7100 with Inductive Slot Sensor
7100 Inductive Slot Sensor
All 7100 Series flowmeters may be fitted with one inductive slot sensor.
Inductive sensors are 2-wire, DC low current devices and are designed to be used with a remote barrier/switch isolator capable of powering the sensor and providing the desired switching option(s). Barrier/switch isolators are available with 220 VAC, 110 VAC or 24 VDC supply voltage requirements, contain single pole, double throw (SPDT) relays, and are DIN rail mountable. (Only 24 VDC units are actually powered by the rail.) See barrier/switch isolator specifications for electrical connections and further details.
The operating temperature range for this sensor is -13° F to158° F (-25° C to 70° C).
Note: We can supply the isolator / barrier upon request, but the user must provide the power supply voltage.
5-25V DC (Switch Isolator)
Output Load Current
<=1 mA – Float Present
>= 3 mA (15 mA Max.) –Float Absent
2 Conductor, NAMUR
Pos = Brown, Neg.= Blue
Pepperl & Fuchs Slot Sensor Approvals:
UL: General Purpose
FM: Intrinsically Safe
CSA: Intrinsically Safe
CENELEC: Intrinsically Safe